600mm 33dBi 4900-6500MHz Dual-Polarized Parabolic Antenna
The RF-4965-30D is a high-gain 4900-6500MHz parabolic antenna designed for fixed directional wireless communication and outdoor wireless backhaul applications.
Featuring a 600mm reflector, a specified 33 dBi gain, dual polarization, and a highly focused radiation pattern, it is suitable for compatible 5GHz/6GHz wireless links requiring precise signal direction and stable antenna alignment.
The antenna features dual N-Female connectors, IP65 protection, and pole-mounting compatibility for outdoor installations.
| Frequency Range | 4900–6500 MHz |
|---|---|
| Peak Gain | 33dBi |
| Polarization | Horizental+Vertical |
| Horizontal HPBW | 6° |
| Vertical HPBW | 4° |
| VSWR | ≤2.0 |
| Front-to-Back Ratio | 45 dB |
| Isolation | ≥ 25 dB |
| Impedance | 50Ω |
| Max Input Power | 50W |
High-Gain 4900-6500MHz Parabolic Antenna for Directional Wireless Links
The RFLink RF-4965-30D 4900-6500MHz parabolic antenna is designed for fixed wireless communication systems requiring concentrated directional transmission and reception in the 4.9–6.5 GHz frequency range.
Equipped with a 600mm parabolic reflector and a specified gain of 33 dBi, this antenna is intended for applications where directional performance, precise alignment, and link stability are important.
Its operating frequency range makes it a potential solution for compatible 5GHz/6GHz point-to-point wireless systems, dedicated outdoor wireless links, and private network infrastructure.
Focused Radiation Pattern
The RF-4965-30D features a narrow radiation pattern with a horizontal half-power beamwidth of 6° and a vertical half-power beamwidth of 4°.
A specified front-to-back ratio of 45 dB helps limit unwanted reception from the rear direction.
These directional characteristics make the antenna suitable for fixed installations where the direction of the remote radio or receiving station is known.
Dual-Polarized Design
The antenna incorporates a dual-polarized configuration with two N-Female RF connectors and 450mm cable assemblies.
This arrangement provides connection options for compatible dual-port wireless radio systems, subject to the equipment’s polarization and RF interface requirements.
The antenna also features a 50Ω nominal impedance, VSWR ≤ 2.0, and polarization isolation of ≥ 25 dB.
Outdoor Installation
Designed for fixed outdoor deployment, the RF-4965-30D features:
- 600mm reflector diameter
- IP65 protection rating
- 35–50mm mounting pole compatibility
- 450mm cable length
- 4.5kg antenna weight
- Dual N-Female RF connectors
Its directional design is particularly suitable for installations where accurate antenna positioning can be maintained.
Typical Applications
- 5GHz/6GHz fixed wireless links
- Point-to-point wireless communication
- Outdoor wireless backhaul
- Private wireless network infrastructure
- Industrial wireless communication
- Remote-site connectivity projects
Application suitability depends on radio compatibility, operating frequency, local spectrum regulations, and site-specific link requirements.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | RF-4965-30D |
| Frequency Range | 4900–6500 MHz |
| Gain | 33 dBi |
| Polarization | Dual Polarity |
| Horizontal HPBW | 6° |
| Vertical HPBW | 4° |
| VSWR | ≤ 2.0 |
| Return Loss (Typ.) | 14 dB |
| Front-to-Back Ratio | 45 dB |
| Isolation | ≥ 25 dB |
| Impedance | 50Ω |
| Maximum Input Power | 50 W |
| Reflector Diameter | 600mm |
| Cable Length | 450mm |
| Connector | 2 × N-Female |
| Weight | 4.5kg |
| Mounting Pole Diameter | 35–50mm |
| Protection Rating | IP65 |
Custom Antenna Solutions from RFLink
RFLink supports wireless equipment manufacturers and system integrators with antenna selection, engineering consultation, and project-specific antenna solutions.
For projects involving different frequency requirements, connectors, cable configurations, or mounting conditions, contact our team to discuss your application and technical requirements.
Contact RFLink to discuss your wireless antenna project.
